Menu Close

Mostly Knitting Blog

Want to find the new stuff on Knitting-and.com, or read about my latest projects and discoveries? This is the place.

A Little Knitting History – Jazz Knitting

From The Sydney Morning Herald, Monday 13th March 1922

JAZZ KNITTING.

The old adage that there is nothing new under the sun was never better exemplified than in the “Jazz” or colour design knitting which has become such a rage in England this season.

Most war-time knitters will remember a modest little book entitled “How to Knit Initials and Battalion Colours,” which was published on the first War Chest day, and which gave directions how to twist the wool used for the design with that used for the ground colour in order to avoid loops at the back of the work. The book contained a series of charts marked off in squares as a guide to the worker. Expert knitters soon outgrew those simple diagrams, and evolved most intricate devices, one lady growing quite famous for her pictured socks. Now the idea which became so familiar to us in Australia has been rediscovered and under the name of jazz knitting is being utilised for the adornment of all manner of knitted garments. Jumpers have gay coloured borders in conventional or floral designs, knitted skirts and scarfs are similarly treated; dresses are decorated at the edge of neck, sleeves, and skirt, woolly bonnets for children have a dainty trail of forget-me-nots and rosebuds worked in the reveres which roll softly back from the face and the long gauntlet gloves, which are so fashionable, achieve an air of distinction by means of a motif in colours to match that upon the scarf or jumper. In fact, colour knitting is employed wherever we are accustomed to find the more familiar embroidery or beading. The work is easily done and takes but little longer than plain knitting. For those who have never attempted to knit a design in colour a few directions will prove helpful.

Designs for cross-stitch embroidery, beading, or filet crochet are very suitable for this work, and there are fascinating possibilities in working out the colour scheme. For instance, in a border design of conventionalised roses, connected by trailing stems, the flowers are of pale yellow with orange centres, the leaves und stems of autumn brown, the background itself being cream. Before beginning to work, it is wiser to mark out the design on squared paper – an exercise book ready ruled may be purchased at any stationers for a trifling sum. Each square represents a stitch, and it is far less tiring to the eye to follow these larger squares when knitting the design. The various colours to be used may be indicated with coloured chalks or by different symbols, such as dots, crosses, daggers, and stars. Next arrange where the design is to appear, and ascertain whether it will fit in without alteration. For instance, if you intend working a border in a jumper, count the number of stitches on your needles and divide by the number of stitches which are contained in each repeat of the design, remembering to place the centre of a motif exactly in the centre front and centre back. A little adjustment of the design may be found to be necessary, but this is easily effected if done before commencing the work. Colour pattern knitting is always done in stocking stitch with the pattern on the right (knit side), and the twisted in colours on the wrong (purl) side. Either wool or silk may be employed, but the pattern colour wool or silk must be of slightly heavier thickness than that used for the ground colour.

Jazz Knitting from te Sydney Morning Herald, 13th March 1922

It is better to join in a fresh strand for each repeat of the pattern, and so obviate carrying on the pattern wool across large spaces occupied by the background colour only. A little practice, however, will soon illustrate where this method is preferable. It is a good plan to weave in the coloured wool some six or eight stitches before commencing and after completing the pattern by passing it at each stitch over the wool with which you are knitting, being careful to keep it at the back of the work. Both wools are held in the hand, and are twisted round the little finger, just as though on thread were used. In making a stitch, insert the needle in the usual way, cross the wool not used over the wool to be used, hold the former down over the first finger and the left hand, and complete the stitch. It sounds rather complex but the motions become perfectly automatic after a very little practice. When you change the colour you will notice that it is not necessary to twist the wools. Purl stitches are worked in similar fashion, the only difference being that as both wools are then in front of the needle, the wool which is being held down must be held over the needle as well.

Remember to twist the thread which you are carrying along very loosely, or you will pucker the pattern. Remember, also, to read the chart from left to right, and then from right to left as you knit and purl alternately. By using a pin to mark your place you will avoid all possibility of mistake.

When the pattern is completed you can cut off all loose ends if you have woven in the wools when commencing and finishing each strand, otherwise all ends must be carefully and neatly run in at the back of the work with a darning needle.

Before making up the garment press each section separately on the right side with a hot iron used over a wet cloth.

signature

Rainbow Loom Experiments – Adding Charms , Button Closures and and Loomey Time Watches

Rainbow loom bracelets with added bits and pieces

My son Charlie is only 5 years old, so coming up with Rainbow Loom projects that are not repetitive, and he can make by himself can be challenging but I think we have found a solution. My craft junk box 🙂

Beads on rainbow loom bands

Any bead with a hole large enough for a rubber band to pass through immediately becomes a great addition for a bracelet.

How to add beads to a rainbow loom bracelet

They can be placed anywhere on the loom and are permanently attached after the bands are hooked. I take no credit for this idea, Charlie came up with it all by himself!

A rainbow loom bracelet with beads

The finished bracelets have beads sitting around the outside edge.

Beaded bands on a rainbow loom

You can also place the brands straight onto the loom as if they were just rubber bands and hook them up as you normally would.

Beaded rainbow loom bracelet with a button closure

I would use beads that are a bit smaller than these though. I bought these from Rainbow Fun and even though they are great looking beads, we haven’t been able to make a bracelet that didn’t either have the beads spaced too far apart, or bunched up too close together.

These little experiments made me wonder how would I go about adding large bracelet charms like my butterfly shown below. I knew it was possible because of the Loomey Time watches so I checked out their website, where you can find a good selection of videos on adding bands to Loomey Time watches, with bands in lots of different styles.

So, using all this information, here’s what I came up with. Step 1: Thread bands through the holes in your charm.

How to add a centre charm to a rainbow loom bracelet 1

Step 2: Put your bands on your loom, leaving the end of the design open.

How to add a centre charm to a rainbow loom bracelet 2

Step 3: Put the bands you threaded through the charm onto the end of the loom.

How to add a centre charm to a rainbow loom bracelet 3

Here’s a view from the side.

How to add a centre charm to a rainbow loom bracelet 4

Now, beginning at the end where you have placed the charm, hook your design. I made a triple single bracelet but there are many different designs that will work with this method.

Here is the first half of my bracelet. I used the full length of the loom to make an adult sized bracelet but you can start placing your bands halfway up the loom for a kid size one.

How to add a centre charm to a rainbow loom bracelet 5

Repeat for the other side. Then make some more! The second bracelet below is a starburst bracelet, like the one I’ve shown before.

How to add a centre charm to a rainbow loom bracelet 6

This technique can also be used to add button closures on a bracelet instead of c-clips.

How to add a button closure to a rainbow loom bracelet 1

It’s easier to thread bands through a button using an old embroidery threading trick for thick threads. Take a thread that will easily go through the holes of your button doubled. Use a thicker thread like perle 8 or 10 rather than sewing thread as that might cut your bands. Thread your band onto your piece of cotton.

How to add a button closure to a rainbow loom bracelet 2

Thread the cotton through one hole of your button

How to add a button closure to a rainbow loom bracelet 3

and pull the band halfway through.

How to add a button closure to a rainbow loom bracelet 4

Thread the same band through the other hole in your button. If your button has four holes, use two rubber bands, one for each pair of holes.

How to add a button closure to a rainbow loom bracelet 5

Put your bands on your loom, then the button last of all, just as I did for the butterfly bracelet. When you’ve finished hooking your bracelet, put the button through the last band that you hooked to secure it and you have a rainbow loom bracelet with a decorative button closure!

How to add a button closure to a rainbow loom bracelet 6

Charlie would like to know what you think of his collection so far? He actually has more bracelets than this but his arms weren’t long enough to get them all on 😉

Some of Charlie's collection of rainbow loom bracelets

signature

Rainbow Loom Mini Baskets Video Tutorial

Rainbow loom Easter basket

Charlie’s latest request for a rainbow loom project was for me to make him a basket. There are a lot of videos on making baskets and bags andit took me quite a lot of video watching to find what I consider to be the best one.

Craft Life have once again come through with a very cute project and high quality video. Click here for Craft Life’s rainbow loom basket tutorial.

Now, I need to buy another loom and find an equally good video on making a bag because he wants something flat and larger, lol (no, I do not indulge my children that much! He’s saved up for his own loom and as soon as the local shop gets one in I’ll be borrowing it).

signature

8 Ways to Weave in Your Ends – Knitting Tutorials

I’ve been a knitter of sorts for almost 40 years and can confidently say that if I can imagine it, I can knit it. However there’s one thing that I’ve never been 100% sure about: darning in my ends. My darns are always secure and neat but after hearing a judge at a knitting competition say that that best knitters darn in their ends so you can’t even find them, my confidence in my technique flew right out the window (along with any desire to enter any more knitting competitions).

The Purl Bee has set me straight with her tutorial on eight different ways to darn in your ends when knitting. I was doing it properly all along!

Weaving in Your Ends – Knitting Tutorials: Finishing Techniques – Knitting Crochet Sewing Embroidery Crafts Patterns and Ideas!.

The Purl Bee is a great blog, not just for this article. So even if you know how to darn in your ends when you knit, check it out anyway. You’ll be glad you did!

signature

Rainbow Loom Starburst Bracelet

Rainbow loom starburst bracelets

The starburst bracelet is probably the first complicated looking bracelet that most people try when learning to use a Rainbow Loom so I decided to give it a go and make Charlie a couple of them. He’s only five years old, so anything more complicated than a triple single is usually up to me.

I used the following video to learn to make my bracelets and would add the following tips:

  1. When adding the bands for the starburst patterns, push the way down on the pegs as you go
  2. Keep them in order. It will make hooking the bands so much easier.
  3. Use a contrasting colour for the capping bands on the starbursts at least the first time you make the pattern. It will help you keep track of where the capping band lies as you work.

Despite it’s complicated look, I found this design is very easy to work and memorise and it’s already become a favourite of Charlie’s and mine.

I hope you’re enjoying my series of Rainbow Loom posts and that it’s saving you a lot of time having to go through youtube videos to find the best ones! Don’t forget to sign up to be notified of future blog posts if you’re interested in more. Next time I’ll be posting a photo tutorial of my own as well as some videos on adding large charms, Loomey Time watches and button closures.

signature